Demonstration of the BARS system at the site for training welders of ProfGazMontazh LLC
On June 1, 2018, a working trip of RaDiaTech LLC to ProfGazMontazh LLC took place in order to demonstrate the operation of the BARS system. The demonstration was held at a welder training site.
During the tests, radiographic inspection of pipes was carried out: with a diameter of 325 mm with a wall thickness of 4 mm by the frontal method through two walls, with a diameter of 159 mm with a wall thickness of 4 mm by a frontal method through two walls, 1020 mm in diameter with a wall thickness of 15 mm by a panoramic method by the method of multiple exposures through one wall, 57 mm in diameter with a wall thickness of 4 mm per ellipse. As a result of the tests, digital radiographic images were obtained, corresponding to the 1st class of sensitivity according to GOST 7512-82.
The personnel of ProfSvarMontazh LLC noted the following positive aspects of using the BARS system:
The ability to control the quality of welded joints in real time;
No need to develop film;
Quick and easy installation of the system on the controlled object;
Possibility of operational inspection of the quality of welding by training personnel.
The managers of ProfSvarMontazh LLC noted for themselves and paid special attention to the BARS system as an opportunity to use it for:
the quality of the training of welders;
operational quality control of welding at the facility.